Professional Backflow Testing, Reporting & Maintenance
Does your backflow prevention device require its annual testing?
At Better Plumbing Solutions & Gas Fitting, we provide professional annual backflow prevention device testing across Melbourne and surrounding suburbs.
We assist residential, commercial and industrial property owners, businesses, schools, factories, body corporates and property managers with their backflow prevention testing requirements.
Our services include testing, reporting, fault identification and repairs to help keep your backflow prevention devices operating correctly.
Annual Backflow Prevention Testing Services
We provide:
- Annual testing of testable backflow prevention devices
- Reduced Pressure Zone Device (RPZD) testing
- Double Check Valve Assembly (DCVA) testing
- Backflow device inspections and fault identification
- Test reports and relevant water authority lodgement
- Repairs and retesting of failed backflow devices
- Replacement of faulty or damaged backflow devices
Why Is Annual Backflow Testing Important?
Backflow prevention devices help protect the drinking water supply by preventing potentially contaminated water from flowing back into the mains water system.
Testable backflow prevention devices are generally required to undergo annual testing in accordance with applicable water authority requirements and Australian Standards.
Regular testing helps identify faulty valves, damaged components and devices that are no longer functioning correctly.
Failed Your Annual Backflow Test?
If your backflow prevention device fails its annual test, Better Plumbing Solutions can assist with identifying the problem and recommending the necessary repairs or replacement.
Common issues include:
- Faulty or damaged check valves
- Worn internal seals and components
- Leaking relief valves
- Debris affecting valve operation
- Ageing or damaged backflow devices
Where appropriate, we can dismantle, clean, repair and rebuild existing devices before carrying out further testing.
Backflow Testing & Water Authority Reporting
We assist customers with backflow prevention device testing and relevant reporting requirements for:
We can complete the required test documentation and arrange lodgement with the relevant water authority where applicable.
Who Do We Provide Backflow Testing For?
- Commercial Buildings & Offices
- Factories & Industrial Facilities
- Schools & Childcare Centres
- Medical Centres & Aged Care Facilities
- Shopping Centres & Retail Premises
- Body Corporates & Property Managers
- Residential Properties
Frequently Asked Questions
How often does a backflow prevention device need testing?
Registered testable backflow prevention devices generally require testing every 12 months, subject to the relevant water authority’s requirements.
What happens if my backflow device fails?
The device may require cleaning, replacement parts, an internal rebuild or complete replacement. Repairs and retesting are required to confirm satisfactory operation.
Do you lodge backflow test reports?
Yes. We can prepare and lodge the required backflow testing documentation with the relevant water authority where applicable.
Can you repair a failed backflow device?
Yes. We provide backflow prevention device repairs and replacements, depending on the condition and suitability of the existing device.
Book Your Annual Backflow Testing
Need to arrange annual backflow prevention device testing in Melbourne?
Contact Better Plumbing Solutions & Gas Fitting today.
Backflow Prevention Services – Areas We Service
Better Plumbing Solutions & Gas Fitting provides backflow prevention device installation, annual testing and repairs across Melbourne and surrounding regions.
Melbourne South-Eastern Suburbs
Berwick • Beaconsfield • Officer • Pakenham • Narre Warren • Endeavour Hills • Hallam • Hampton Park • Dandenong • Keysborough • Springvale • Cranbourne • Clyde • Frankston • Rowville • Lysterfield • Ferntree Gully • Boronia
Yarra Valley & Eastern Suburbs
Emerald • Ringwood • Croydon • Bayswater • Wantirna • Box Hill • Lilydale • Mount Evelyn • Mooroolbark • Chirnside Park • Healesville • Seville
Greater Western Water Region
Melbourne CBD • Richmond • Collingwood • Footscray • Altona • Williamstown • Kensington • Flemington • Seddon • Essendon • Yarraville • Maribyrnong
Gippsland Water Region
Drouin • Warragul • Yarragon • Trafalgar
Backflow Prevention Device Installations | Annual Testing | Repairs | Replacements
Residential • Commercial • Industrial
Better Plumbing Solutions & Gas Fitting
Call 0468 582 686
If your property has a registered backflow prevention device, annual testing is essential to ensure it is operating correctly and remains compliant with your local water authority’s requirements.
At Better Plumbing Solutions, we provide professional annual backflow prevention device testing, compliance reporting, repairs and water authority lodgements for commercial, industrial and residential properties throughout Melbourne.
As a proud Backflow Prevention Association of Australia (BPAA) member, we help businesses, property managers and homeowners protect Melbourne’s drinking water supply while meeting annual compliance obligations.
What Is a Backflow Prevention Device?
A backflow prevention device is a specialised valve installed on a property’s water supply to prevent contaminated water from flowing back into the public drinking water system.
Backflow can occur when changes in water pressure cause water to reverse direction, potentially allowing contaminants to enter the mains water supply.
These contaminants may include:
- Chemicals
- Fertilisisers
- Pesticides
- Cleaning products
- Industrial fluids
- Bacteria and microorganisms
Regular testing ensures the device continues to protect both your property and the wider community.
Why Is Annual Backflow Testing Required?
Backflow prevention devices are mechanical devices that experience wear over time.
Annual testing ensures:
- The device is operating correctly
- Melbourne’s drinking water remains protected
- Compliance with water authority regulations
- Early detection of faults
- Reduced risk of costly repairs or device failure
Many commercial and industrial properties, as well as some residential properties, are legally required to have their registered backflow prevention devices tested every year by an accredited tester.
Our Annual Backflow Prevention Services
Better Plumbing Solutions provides complete backflow prevention services, including:
Annual Backflow Prevention Device Testing
Professional testing of registered backflow prevention devices in accordance with Australian Standards.
Backflow Device Repairs
If your device fails testing, we can carry out repairs and arrange retesting.
Backflow Device Replacement
Where repairs are not practical, we supply and install approved replacement backflow prevention devices.
Compliance Reporting
Detailed reports and certification are provided after testing.
Water Authority Lodgements
We can submit completed test reports directly to:
- South East Water
- Yarra Valley Water
- Greater Western Water
This helps ensure your compliance requirements are met on time.
Who Needs Annual Backflow Testing?
We regularly provide annual testing for:
- Commercial buildings
- Industrial facilities
- Medical centres
- Hospitals
- Aged care facilities
- Schools
- Childcare centres
- Apartment buildings
- Shopping centres
- Factories
- Warehouses
- Sporting clubs
- Irrigation systems
- Body corporates
If your property has a registered testable backflow prevention device, annual testing is generally required.
Why Choose Better Plumbing Solutions?
When it comes to annual backflow prevention device testing, experience and reliability matter.
✔ BPAA Member
✔ Accredited Backflow Prevention Tester
✔ Licensed & Insured Plumbers
✔ Commercial, Industrial & Residential Services
✔ South East Water Lodgements
✔ Yarra Valley Water Lodgements
✔ Greater Western Water Lodgements
✔ Compliance Reporting
✔ Prompt & Reliable Service
Areas We Service
Better Plumbing Solutions provides annual backflow prevention device testing throughout Melbourne, including:
- Berwick
- Emerald
- Rowville
- Pakenham
- Narre Warren
- Officer
- Beaconsfield
- Dandenong
- Glen Waverley
- Box Hill
- Ringwood
- Croydon
- Bayswater
- Malvern
- Knox
- Melbourne Eastern Suburbs
- Melbourne South Eastern Suburbs
- Melbourne Western Suburbs
Frequently Asked Questions
How often does a backflow prevention device need testing?
Most registered testable backflow prevention devices must be tested annually by an accredited backflow prevention tester to ensure they remain compliant and operate correctly.
Who can perform annual backflow testing?
Annual testing should be carried out by an accredited backflow prevention tester who is qualified to inspect, test and certify registered devices.
What happens if my backflow prevention device fails the test?
If your device does not pass testing, Better Plumbing Solutions can carry out repairs or replacement and retest the device to restore compliance.
Can Better Plumbing Solutions lodge my compliance report?
Yes. We can lodge completed test reports with South East Water, Yarra Valley Water and Greater Western Water on your behalf.
Do you provide scheduled annual reminders?
Yes. We can help property owners and managers stay on top of their annual testing obligations by arranging recurring annual testing programs.
Contact Better Plumbing Solutions
Need to arrange your annual backflow prevention device testing?
Better Plumbing Solutions provides professional backflow testing, repairs, compliance reporting and water authority lodgements throughout Melbourne.
0468 582 686
Better Plumbing Solutions
Your Trusted Backflow Prevention Testing Specialists
✔ BPAA Member
✔ Accredited Backflow Prevention Tester
✔ Annual Compliance Testing
✔ Commercial • Industrial • Residential
Book your annual backflow prevention device testing today and keep your property compliant while helping protect Melbourne’s drinking water supply.