Backflow Prevention Ringwood
Professional Backflow Prevention Services in Ringwood
Backflow prevention is an important part of protecting Melbourne’s drinking water supply.
If contaminated or non-potable water flows backwards through a property’s plumbing system and enters the drinking water network, it can create a potential health and safety risk.
Better Plumbing Solutions provides professional backflow prevention services in Ringwood, including backflow prevention device installation, annual testing, repairs, maintenance and compliance services.
We service residential, commercial and industrial properties in Ringwood and surrounding Melbourne suburbs.
What Is Backflow?
Under normal circumstances, water flows from the drinking water network into your property.
Backflow occurs when water flows in the opposite direction and potentially allows water from within a property to enter the drinking water supply.
Changes in water pressure can create conditions where backflow may occur. This is why appropriate backflow prevention is important for properties where there is a potential risk of contamination.
Why Is Backflow Prevention Important?
A backflow prevention device is designed to help stop potentially contaminated water from flowing back into the drinking water network.
Backflow protection can be particularly important for properties where plumbing systems, equipment or business activities create a potential hazard.
These can include:
- Commercial properties
- Industrial facilities
- Factories
- Restaurants and commercial kitchens
- Medical centres
- Schools and childcare facilities
- Workshops
- Irrigation systems
- Warehouses
- Properties using chemicals or other potentially hazardous substances
The type of backflow protection required depends on the property’s circumstances and assessed hazard.
Does My Ringwood Property Need a Backflow Prevention Device?
Not every property requires the same type of backflow prevention device.
The required level of protection depends on factors including the property’s plumbing arrangements, water usage and potential hazard.
For example, properties assessed as having a medium or high hazard may require an appropriate containment backflow prevention device.
If you’re unsure whether your Ringwood property requires backflow protection, a suitably qualified backflow plumber can assess the plumbing arrangements and advise on the appropriate requirements.
Backflow Prevention for Ringwood Businesses
Commercial properties can have more complex plumbing systems and activities that create a potential backflow risk.
Better Plumbing Solutions provides backflow prevention services for businesses in Ringwood and surrounding suburbs, including:
- Factories
- Warehouses
- Offices
- Restaurants
- Cafés
- Hotels
- Medical centres
- Schools
- Childcare centres
- Industrial sites
- Shopping centres
- Property management portfolios
If your business has a testable backflow prevention device, regular testing and maintenance can help ensure the device continues to operate correctly.
Backflow Prevention Device Installation Ringwood
If your property requires a backflow prevention device, the appropriate device needs to be selected based on the property’s hazard and plumbing requirements.
Different levels of hazard can require different types of backflow prevention devices.
Better Plumbing Solutions can assess your property’s plumbing requirements and assist with backflow prevention device installation in Ringwood.
We can also assist with replacement of existing devices where a device is damaged, faulty or no longer suitable.
Annual Backflow Prevention Testing Ringwood
If you have a testable backflow prevention device, annual testing is an important requirement.
The requirements can vary depending on the property, device and water corporation responsible for your property.
Better Plumbing Solutions provides annual backflow prevention testing in Ringwood and can assist with the testing process, documentation and applicable water authority lodgements.
Yarra Valley Water Backflow Testing
Ringwood properties are generally within the Yarra Valley Water service area.
Yarra Valley Water requires applicable testable backflow prevention devices at the water meter to be tested every 12 months, with results submitted to the water corporation.
If your Ringwood property has a testable backflow prevention device, Better Plumbing Solutions can assist with the annual testing and applicable reporting requirements.
What Happens During Backflow Testing?
Annual backflow testing checks that the testable backflow prevention device is operating correctly.
Depending on the type of device, testing may involve:
- Inspecting the device
- Testing the device’s operation
- Checking components
- Identifying faults
- Recording test results
- Completing required documentation
- Carrying out repairs where necessary
- Retesting following repairs
If the device fails its test, further investigation or repairs may be required.
What Happens If a Backflow Device Fails?
A failed backflow test doesn’t automatically mean the entire device needs to be replaced.
The device can be inspected to determine the cause of the failure.
Depending on its condition, it may be possible to repair or service the device.
If replacement is required, Better Plumbing Solutions can assist with installing a suitable replacement device.
Following repairs, the device can be retested where required.
Backflow Device Repairs & Replacement Ringwood
Backflow prevention devices can develop faults or experience wear over time.
If your device fails testing or is showing signs of deterioration, it is important to have it assessed by a suitably qualified plumber.
Better Plumbing Solutions can assist Ringwood property owners and businesses with:
✔ Backflow device repairs
✔ Backflow device servicing
✔ Backflow device replacement
✔ Backflow testing following repairs
✔ Compliance requirements
Backflow Prevention for Commercial & Industrial Properties
Backflow prevention can be particularly important for commercial and industrial properties.
Businesses may have equipment, processes or plumbing arrangements that create a higher potential hazard.
Better Plumbing Solutions provides commercial backflow testing and prevention services in Ringwood for businesses including restaurants, factories, warehouses, medical facilities, schools, childcare centres and other commercial premises.
If you’re responsible for a commercial property, we can help establish an annual backflow testing schedule to ensure applicable devices are tested when required.
BPAA Member
Better Plumbing Solutions is a member of the Backflow Prevention Association of Australia (BPAA).
The BPAA provides information and resources relating to backflow prevention and promotes the importance of appropriate backflow prevention, testing and maintenance.
When arranging backflow testing, it is important to use a plumber with the appropriate qualifications and accreditation for the work being carried out.
Backflow Prevention Ringwood & Surrounding Suburbs
Better Plumbing Solutions provides backflow prevention services throughout Ringwood and Melbourne’s eastern and south-eastern suburbs.
We service areas including:
Ringwood
Ringwood East
Ringwood North
Croydon
Croydon Hills
Mooroolbark
Kilsyth
Bayswater
Boronia
Wantirna
Wantirna South
Knoxfield
Scoresby
Rowville
Vermont
Vermont South
Doncaster
Box Hill
Glen Waverley
Mount Waverley
Ferntree Gully
Emerald
Berwick
and surrounding Melbourne suburbs.
Backflow Prevention Services
Better Plumbing Solutions provides:
✔ Backflow prevention device installation
✔ Annual backflow prevention testing
✔ Commercial backflow testing
✔ Industrial backflow testing
✔ Backflow device repairs
✔ Backflow device replacement
✔ Backflow compliance services
✔ Water authority lodgements
✔ Backflow prevention assessments
Need a Backflow Plumber in Ringwood?
If your backflow prevention device is due for its annual test, has failed testing or you need a new device installed, Better Plumbing Solutions can help.
We provide backflow prevention services in Ringwood for residential, commercial and industrial properties.
Call Better Plumbing Solutions on 0468 582 686
Backflow Prevention Ringwood | Testing | Installation | Repairs | Compliance